Peoria, AZ
Peoria Water Softeners, Sized and Budgeted Before the Old One Quits
We install water softeners sized to how much water your home actually uses, then add whole-home carbon filtration, under-sink reverse osmosis or automated salt delivery where they make sense. Homeowners in Peoria, Sun City and Surprise get a clear quote by phone and an install date they choose.
- 15-year warranty on the resin
- Quotes given by phone
- Sized to your household
- Install dates you choose

Softeners First, Then the Filtration Around Them
Most of our work is water softener installation: a resin tank, a brine tank and a control valve plumbed into your home's main line so calcium and magnesium are exchanged out before they reach your water heater and fixtures. Every softener we install carries a 15-year warranty on the resin. Around that core we fit whole-home filtration to take chlorine taste and odor out of every tap, reverse osmosis systems for drinking and cooking water at the kitchen sink, and automated salt delivery so the brine tank never runs dry without you noticing.

Whole-Home Filtration
A carbon filter on your main water line that reduces chlorine taste and odor at every tap and shower, with a clear plan for media replacement.
Automated Salt Delivery
We bring the right softener salt on a schedule based on your actual usage, load the brine tank and check it for salt bridges on every visit.
Water Softener Installation
We size, plumb and program a metered water softener for your home so scale stops building up in your water heater, fixtures and appliances.
Reverse Osmosis
An under-sink RO system for your drinking and cooking water, installed with a dedicated faucet and a written filter-change schedule.
Where We Install
We work in Peoria and the communities around it, including Sun City West, Surprise, Sun City, El Mirage and Youngtown. We also schedule installs in Anthem and New River.
- Peoria
- Sun City West
- Surprise
- Sun City
- El Mirage
- Anthem
- Youngtown
- New River
Near the edge of that map? Give us your cross streets on the phone and we will confirm whether your home is on our schedule before we talk equipment.

About Peoria Water Softener
We are a local company that installs softeners and filtration systems inside people's homes, and that is all we do. Hard water leaves scale in water heaters, shower valves and dishwasher spray arms long before anyone sees a problem, so most of our customers call when they want to get ahead of that wear instead of reacting to a failed appliance.
We explain the equipment in plain terms: what the resin does, why a carbon bed needs replacing on a schedule, what the RO membrane removes and how often the salt runs out. When you know how each part works, you can plan for it and budget for it.
- Warranty
- 15-year warranty on the resin
What Moves the Price of a Softener or Filter
Each quote is built from your equipment choice and the pipework it connects to, and both differ from one home to the next. The factors below are what we work through on the call. Having them in mind early lets you set money aside before the old system gives out.
We give your quote by phone once we know your household size, your plumbing setup and what you want treated. The written price covers the equipment, parts and labor we discussed, so the number does not change on install day.
- Grain capacity and tank size
- A larger household or higher water use needs more resin and a bigger mineral tank. Undersizing saves a little up front but forces more frequent regeneration, which burns more salt and water every month.
- Control valve type
- Metered, demand-initiated valves regenerate based on the gallons you actually use. They cost more than timer valves but usually save salt over the life of the system.
- How the softener connects to your main line
- Plenty of newer houses in the area have inlet and outlet pipes for a softener roughed in near the water heater or garage wall, and connecting to those is quick work. Where nothing was provided, we tie into the main supply ourselves, and the amount of new pipe and fittings that takes affects the price.
- Removing the old unit
- Hauling away an existing softener, capping old connections or rerouting a drain line all add time we include in the quote.
- Added filtration
- Pairing a softener with a whole-home carbon tank or an under-sink reverse osmosis system adds equipment and a second tie-in. Doing both in one visit is usually cheaper than two separate trips.
How an Install Runs
Four steps, from the first call to the first regeneration cycle.
- 1
The phone call
You describe the signs: white crust around faucets, spotted glassware, a water heater that pops and ticks, or a brine tank you seem to refill constantly. From there we cover how many people share the water and where the current unit or plumbing loop is located.
- 2
Your quote and options
We explain which system fits and why, and price the equipment, the labor and the yearly upkeep. If a repair will do, you hear that too.
- 3
Install day
We shut off the main, set the tanks, plumb the bypass valve, run the drain line to an air gap and connect the brine line. Then we load the resin bed, program the control valve and run a manual regeneration to confirm everything cycles correctly.
- 4
Startup and handoff
Before we leave we check every joint for leaks, walk you through the bypass and the salt level, and clean up the work area.
Questions Homeowners Ask Us
Something not covered here? (623) 400-3457
How do I know my softener needs replacing rather than repairing?
Look at age and symptoms together. A unit that still regenerates but leaves spotty water may only need the injector cleaned or the resin replaced. If the control valve is failing, the tank is cracked and the resin is exhausted all at once, replacement is usually the better spend. We will tell you which side you are on during the call.
What warranty comes with an install?
Our softeners come with a 15-year warranty on the resin. Our installation work is covered by a 2-year labor warranty.
How much salt will a new softener use?
It depends on your household's water use and the valve type. A metered, demand-initiated valve only regenerates when the resin is close to its capacity, so it uses noticeably less salt than an older timer unit that regenerates on a fixed schedule. If keeping the brine tank filled is a chore, our automated salt delivery service handles it for you.
Can I drink softened water?
A softener swaps hardness minerals for a small amount of sodium. Many people prefer a reverse osmosis system at the kitchen sink for drinking and cooking, since the membrane removes that sodium along with other dissolved solids. It is a common pairing with a softener.
Will a softener get rid of the chlorine taste?
No. Softening resin removes hardness, not disinfectant. A whole-home carbon filter installed ahead of the softener takes out chlorine taste and odor at every tap, and it also protects the resin from chlorine wear over time.
Do I need to be home for the install?
Yes, someone needs to be there to let us in and for the walkthrough at the end. We shut off your water while we tie in, so plan for a short stretch without it. We give you the expected length of the job when we set your date.
Can I plan the install for a later month?
Yes, and many homeowners do. Getting your quote now lets you budget for the equipment and pick a date that works, instead of buying in a rush after the old unit stops softening.
How We Work With Your Home
A softener that fails in the middle of a busy month is an unplanned bill. We set things up so you see the costs coming and decide the timing yourself.
Sized by grain capacity, not guesswork
Before we recommend a tank, we learn your headcount, your bathroom count and how the existing unit is behaving. Those answers set the grain capacity and regeneration schedule, so the resin is never overworked and a two-person household is not paying for a system built for six.
Upkeep priced alongside the equipment
Salt, carbon cartridges and RO membranes are ongoing costs. We lay them out with the install price so you can budget the first year and the years after, not just install day.
Repair or replace, answered honestly
If your existing softener only needs a control valve, an injector cleaned or a fresh resin bed, we say so. Replacement is worth it when the tank, valve and resin are all near the end together.
Plumbed with a bypass and a proper drain
Every softener gets a bypass valve so you keep water if service is ever needed, and the drain line is run to an air gap so wastewater cannot siphon back into your supply.
A tidy work area
We lay down drop cloths in the garage or utility area, flush the new system before we leave and take the old unit and packaging with us.

Put a Softener Plan on the Calendar
Tell us your household size and what your current system is doing. We will size the right setup and price it so you can decide when to move ahead.